西班牙语Common fault maintenance of blow molding machine
Common fault maintenance of blow molding machine
34. Failure: the height of the heating rod and the heat shield
Check: The correct position is to ensure that the height of the upper surface of the heat shield is 1.5mm~2mm higher than the height of the upper surface of the heating rod. Adjustment methods: 1. The position of the heat shield is basically fixed and cannot be adjusted. 2. Adjust the height of the heating rod. Loosen the fixing bolts of the heating rod, and adjust the height of the heating rod up and down to ensure a reasonable height with the heat insulation sleeve.
35. Failure: During the operation of the bottle blowing machine, after the bottle taking finger takes out the bottle, the bottle is turned over and does not move, and the bottle does not move, but the large chain and the embryo taking and embryo feeding still move; until the preform and the bottle are accumulated in the mold , there is no fault alarm, press emergency stop to stop.
Check: Reason: 1. Take out the bottle preform and bottle in the mold after the machine is stopped, manually click on each part to check the action, click "take bottle in" and then click "take bottle before and after horizontal movement" to check whether the proximity switch at the origin of the bottle is normal. ; 2. Click "Take the bottle and turn the finger back and forth" to check whether the magnetic switch of the bottle is normal. 3. After checking that the manual action is normal, start the machine to check whether the proximity switch of the origin of the bottle and the bottle are normal.
the factory adheres to the concept of "Reputation priority, Service priority, Reliable quality", and manufactures bottle blowing machine with stable performance, low energy consumption, simple operation and durability to benefit every customer and provide customers with comprehensive technical support and services;
In more than ten years of business, the factory's equipment has been exported to Southeast Asia, the Middle East, Europe, South America, North America, Australia, Africa and other countries, and at the same time, received customer satisfaction reviews.
